| Type: | Welding Positioner |
|---|---|
| Structure: | Platform |
| Rotaion Speed: | 0.1-1rpm |
| Tilting Angle: | 0-90° |
| Voltage: | 110V/220V |
| Welding Turning Rolls Type: | Adjustable |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier automatic lifting welding rotary turntable positioner for robot
Features:
1.500mm workbench
Thickness 12mm, durable wear
2. With XH400mm
Holding diameter 400mm
3. Time reset control box
Welder linkage, automatic welder
4.0-90 degree free rotation
Turbine worm, automatic locking
5. Quickly tighten and loosen
a pair of claws, positive and negative
6. Anti-high frequency circuit board
Prevent high frequency breakdown of argon arc welding
7. Rack spray treatment
Bright and fresh, never rust
8. Four-wire conductive carbon brush
High copper wear resistance and long life
9. With welding gun bracket
The welding gun is fixed and the weld is well formed.
Parameters:
Model: BWJ-300
Input power:AC220V 50/60HZ
Capacity:0°/90° 300Kg / 150Kg
Work bench diameter:500mm
Optional chuck:XH400
Blessing range:30-500mm
Work bench middle diameter:90/140/170mm
Work bench height:650mm
Work bench turning speed:0.2-2.5rpm
Returning angel:0~90°
Turning ways:manual
Turning power:200w
Out size:590(L)×610(W)650(H) mm
Net weight:120kg
Before using the welding positioner, make sure that the plugs are connected correctly and reliably, and the grounding wire is connected to the ground reliably to avoid equipment damage.
1. Turn on the power and turn on the power switch "POWER" and the power indicator will light.
2. Under the "FOOT" control state, the foot switch is pressed, the table rotates, the foot switch is released, and the table stops rotating; in the "AUTO" control state, the machine enters the automatic control or time control state.
3. Turn the direction switch to "→", the table rotates clockwise; dial "←" and the table rotates counterclockwise.
4. Rotate the speed adjustment knob "SPEED" to change the table speed, rotate clockwise, and speed up; counterclockwise rotation, slow down.
5. Time control function: This function can realize the automatic operation function of the positioner within a preset period.
The specific operation method is as follows:
Turn on the power, preset a working cycle (in three states, "H" means "hour" is the counting unit, "M" means "minute" is the counting unit, "S" means "second" is the counting unit), Turn on the "POWER" switch, the power indicator light is on, and the worktable will automatically stop working after one cycle of rotation;
6. Welder interface function: This function can realize the linkage between the welder and the positioner.
The positioner is a special welding auxiliary equipment, suitable for welding displacement of rotary work, to obtain the ideal machining position and welding speed. It can be used with the operation machine and welding machine to form an automatic welding center, and can also be used for manual work. Firstly, according to the maximum rotation speed of the table, the motor of the same power, the speed reducer of the Tongguang reducer, the lower the maximum speed, the larger the torque, the smoother the rotation; to check whether the use of the welder current, the rotary conduction of the positioner can meets the requirements;the motor control choice, you can choose DC voltage speed regulation, AC frequency control, stepping or servo numerical control speed regulation, etc., according to the need of the machine intermediate through hole. Finally, select the chuck fixture and the gun rack according to actual needs.
Select the position of the positioner:
1. Load 2. Speed 3. Diameter 4. Current
5. Control 6. Through Hole 7. Accessories
Choose big or not small
What is the outlook?
How to pack and load the tank welding machine?
Positioner selection considerations:
1. When the positioner is used horizontally, it is selected according to the weight of the workpiece;
2. The maximum speed of worktable rotation , the motor of the same power, decelerates by the reducer, the lower the maximum speed, the greater the torque, the smoother the rotation;
3. Does the table diameter meet the requirements of the workpiece and whether the workpiece is eccentric;
4. welding current of welding machine , whether the machine's rotating electrical conductivity meets the requirements;
5. Motor control selection, you can choose DC voltage speed regulation, AC frequency conversion speed regulation, stepping or servo numerical control speed regulation;
6. Combine the positioner and the workpiece to actually select the size of the through hole in the middle of the machine;
7. Combine the actual need to select accessories such as chuck, gun holder, thimble, bracket and swinger and argon arc welding wire feeder;
Avout Us:
FAQ:
Y.Are you manufacture or trade company ?
M:We are professional manufacturer of many kinds welding and cutting machine.
Y:How to package?
M:Frist layer, covered by plastic film for waterproof,second layer:covered by foam to protect the machine from shaking ,third layer:steel craft case.
Y:Will the package strong enough?
M:Our package is strong enough,nearly all our machine is packed in this way,and the customers receive in good state,So please don't worry,you will receive the welding machine in good condition.,but also can package as your requirement.
Y:How can you guarantee the quality of welding machine?
M: we have passed the ISO test,and if you have time,you can come to our factory to check the machine before order .and we have one year guaranteed,free parts can be send free within one year.
Y:How to install and operate the machine?
M:1.the machine is installed by us before send out,you need to install some parts according to the vedio and manual we send to you.
2.engineer can come to your side to install for you if need
3.install and operate training can be offer in our factory or in your side.
Y:What can I to do if the machine have problem?
M:please contact us at the frist time,and don't repair in your side,we will tell you how to solve it after discuss,we can guaranteed to solve within 24h if not the part break.
Y:how is your after-sale customer service?
M:you can contact our sales manager if have any question,we are online everyday.
Y.How to place an order?
M:1). Tell us the weight and picture of your workpiece,the more detailed the better .
2). After view your requirement ,we offer best plan and quotation .
3). Price confirmed ,we can proceed order and arrange shipment to your country.
Our Service:
Thank you for your view,please contact us at any time if you can't find the information you need,then we will reply you at the frist time,we will offer 7x24h service before and after order.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}